13.  Which of the following is a key assignment for officers in the watch organization? 1.  CDO 2.  OOD 3.  JOOD 4.  Each of the above 14.  Which of the following is a duty of the QMOW? 1.  To maintain the ship’s deck log 2.  To make sure all bells are correctly answered 3.  To stand watch in the bridge and deliver messages 4.  To line up and operate the steering engines 15.  What person makes sure all deck watch stations are manned with qualified personnel and all watch standers from previous watches are relieved? 1.  BMOW 2.  QMOW 3.  JOOW 4.  JOOD 16.  Where is the fog lookout watch usually stood? 1.  Helm 2.  Aftermast 3.  In the bow where approaching ships can be heard 4.  CIC 17.  For what reason does the fog lookout watch normally consist of two Sailors? 1.  In case there is a man overboard 2.  To allow the lookout to work without having his/her hearing impaired by wearing sound-powered phones 3.  The two-man security rule 4.  To verify visual and sound contact 18.  Which of the following watches must, as a minimum, meet the requirements of the International Regulations for Preventing Collisions at Sea? 1.  Sky 2.  Surface 3.  Fog 4.  Each of the above 19.  What type of watch is set when positive steering control must be maintained? 1.  Helmsman 2.  Lee helmsman 3.  After steering 4.  QMOW 20.  What is the purpose of the security watch? 1.  To minimize damage to equipment 2.  To control contact with the CIC 3.  To increase the physical security of the ship 21.  Which of the following is a duty of security watches and patrols? 1.  To be alert for fire hazards 2.  To check the security of weapons magazines 3.  To inspect damage control closures 4.  Each of the above 22.  You are a member of a security patrol, and you detect a fire hazard that affects the safety of the ship. What action should you take? 1.  Note it on the security log 2.  Inform your LCPO 3.  Investigate it 4.  Report it to the OOD immediately 23.  What is the purpose of a shipboard fire watch? 1.  To immediately extinguish fires caused by welding or burning operations 2.  To make sure the welder strikes the welding surface 3.  To relay messages from the work site 4.  To make sure there is a controlled burn of material at the work site 24.  When standing a barracks security watch, you have which of the following responsibilities? 1.  Knowing and carrying out provisions of the fire bill 2.  Knowing and carrying out provisions of the emergency bill 3.  Knowing barracks regulations 4.  All of the above 3-22