• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SHOTGUNS
BLACKENING SIGHTS

Basic Military Requirements (BMR) Revised Edition
Page Navigation
  302    303    304    305    306  307  308    309    310    311    312  
FIRING TECHNIQUES—RIFLE The most important factors for you to remember about firing a rifle are sight alignment and achieving a correct aiming point. Together they make up the sight picture. Sight Alignment Sight alignment involves looking through the rear sight aperture, focusing the eye on the front sight post (or blade), and centering the front sight post exactly in the rear sight aperture, both vertically and horizontally. The top of the front sight is level with the horizontal center line of the rear sight, and the body of the front sight is centered between the rear sight aperture (fig. 11-21). REAR SIGHT.—When you are in different firing positions (standing, kneeling, or sitting), your aiming eye is at a slightly different distance from the rear sight. This  distance  is  referred  to  as  eye relief.  Eye  relief makes the opening (peep) of the rear sight appear larger or smaller, depending on the firing position. Regardless of the apparent size of the rear sight opening, you must  align  the  front  sight  in  the  center  of  the opening. It is important to keep your eye the same distance from the peep sight in any particular firing position. To ensure this distance is always the same, you must hold the rifle in the same exact location for each shot. This location is commonly called the spot weld or anchor. There are several tricks shooters use to help maintain this distance. For example, you can place a small piece of  tape  on  the  stock  of  the  rifle  where  it  touches  the cheek. In this way, you can feel whether your cheek has the proper eye relief. FRONT SIGHT.—The front sight always appears to be the same size. However, depending on the distance your eye is from the rear sight, more or less of the front sight may be visible in the sight picture. The front sight, not the target, is the point of focus for the eye. As such, the front sight will be sharp and distinct in outline. For this  reason,  keep  the  front  sight  square,  level,  and blackened. AIMING POINT.—The aiming point is the point on the target where the sights of the weapon are brought to bear. The correct aiming point is at 6 o’clock; that is, the bottom of the bull’s-eye of a type “A” target (fig. 11-22) or the silhouette of a type “D” target (fig. 11-23). Any location on the target face is always given relative to a similar position on a clock face regardless of the target shape. Therefore, a vertical line in the exact center of  the  target  would  be  described  as  running  from  12 o’clock (top) to 6 o’clock (bottom). SIGHT PICTURE.—To obtain the correct sight picture,  you  need  to  align  the  rear  sight,  the  front sight, and the bull’s-eye (figs. 11-22 and 11-23). Each of these three elements affects the sight picture. As you  can  see  from  figure  11-24,  any  error  in  sight alignment  will  increase  as  the  range  increases.  An error  in  the  aiming  point  remains  constant  as  the range increases. At close ranges, the bull’s-eye or silhouette appears larger in relation to the front sight than it will at longer 11-16 Student Notes: Figure 11-21.—Proper sight alignment. Figure 11-22.—6 o’clock sight picture held on “A” target at a range of 200 yards.







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.